Heat Reflective Waterproofing Membrane

Product Enquiry

Solacoat Heat Reflective Waterproof Membrane.

It is a flexible acrylic long life, medium gloss, elastomeric, high – build membrane-type coating suitable for masonry walls and roofs, providing excellent water, CO2 impermeability and very high solar reflectivity.

The high solar reflectivity together with the advanced formulation, permits sharing of the heating/cooling burden that leads to reduced temperatures in roof cavities and hence reduced heat loadings on building interiors.

Solacoat Heat Reflective Waterproof Membrane contains no heavy metals or other toxic ingredients and so is suitable for use where collection of water for drinking or tank storage is contemplated. Refer the document Painting of Roofs Involving Tank Water.

Masonry walls, concrete tiles, fibro roofs, metal roofs – flat or pitched, metal tiles, fibre cement sheeting, masonry or fibre cement shingles and most masonry surfaces when suitably primed.

Apply Solacoat Heat Reflective Waterproof Roof Membrane at a minimum rate of 5.0 m2/ litre per coat for a two coat application as the preferred application. Allow minimum 24 hours drying time between coats. Alternatively, if a satisfactory period of fine weather is forecasted then one (1) coat of Solacoat Heat Reflective Waterproof Roof Membrane can be applied at a spreading rate of 2.5 – 3 square metres per litre. This will provide a dry film thickness of 170 microns.

If waterproofing were required, application of a third coat at 5.0 m2/ litre would be necessary.

For airless spray application, a pump unit of at least 32:1 power must be used with a 22 – 26 thou tip.

Drying time is approximately 24 hours at 25°C when applied at the recommended rate.

Drying Times may be extended by adverse drying conditions or very high film build.

For complete product specifications and MSDS please get in touch.